These cool pedals come with a big and low-profile platform that provides tons of grip. At the same time, the weight still remains below 400 grams. Perfect for any application and what's important - they offer legendary strength & reliability and will take years of the worst beating. A combination of varied pin height and special cage shape guarantee good grip in all conditions including wet muddy tracks, yet still allow for relatively easy foot position adjustments when needed. The pedals run on a combination of sealed bearings and bushings. The Radiance were chosen as the "Best overall pedals" out of 17 platform pedals in a group test conducted by Singletrack magazine.
Specs
AL6061-T6 fully CNC machined huge flat and very low profile platform
Platform size: 103mm x 97mm x 13mm (22mm including pins)
Thickness: 13mm platform w/o pins , 14-16mm thick around the axle area, 22mm one big flat surface formed by pins
Two sealed bearings and bushing system
Spindle interface: 8mm allen hex key slot.
Axle thread size: standard 9/16"
11 removable pins per side, 4.5mm high at the ends and around 3mm high close to the axle area.
Supplied pins: M4 x 0.7mm standard, 7mm long, off-the-shelf available worldwide in a variety of lengths.
Weight: ~395g (oilrub 405g, oilslick 410g)
Need help choosing the right product?
Our team of riders and experts will be pleased to help you.
Specs
Size
Metric
Imperial
This is a size chart.
Geo
Metric
Imperial
Geometry of this bike.
Reach
Horizontal measurement taken from the middle of the bottom backet to the middle of the headtube.
Stack
Vertical measurement taken from the middle of the bottom bracket to the middle of the headtube.
Effective Top Tube
Horizontal measurement taken from the middle of the seatube to the middle of the headtube.
Actual Top Tube
True length of the top tube taken from the seatube along the toptup to the headtube.
Standover Height
Vertical measurement taken from the ground to the the middle of toptube.
Seat Tube Angle
Angle of the seatube.
Seat Tube Length
Lenght of the seat tube taken from the bottom bracket to the top of the seat tube (the measure is taken alongside the seat tube)
Headtube Angle
Angle of the headtube.
Headtube
Vertical lenght of the headtube.
Chainstay
Horizontal measurement taken from rear axle to the bottom bracket.
Wheelbase
Horizontal measurement between the two wheel axles.
BB Height
Vertical measurement taken from the ground to the bottom bracket (Never taken at sag).
BB Drop
Vertical measurement between the height of the axles and the height of the bottom bracket.
