A premium MTB singlespeed hub with a 10t driver and wide flanges for great wheel strength. It runs on four high quality sealed bearings. We use a 10t driver that fit's big strong bearings inside so everything runs smoothly without any bearing problems. The steel axle is cut flush with the nuts for a clean look and for safety reasons. Steel nuts give extra strength and clamping force for securing your wheel in horizontal dropouts. For weight reduction the cones have been made from aluminium. The looks are just as good as the function with black hardware and an anodized finish. Disc brake compatible. Hubs are offered in 32h version only and in a choice of four colors included new limited edition oil slick version.
Specs
MAIN FEATURES
10x135mm
material: AL6061-T6 body, AL7075-T6 axle and cones, steel bolts
female oversize axle system + side bolts this solution rules as it's light & strong!
4 x #6902 sealed bearings (2x main hub bearings, 2x inside driver)
bolts compatible with 10mm dropouts: 17mm hex head and 6mm Allen hex sockets, 3/8"x24tpi thread
hollow AL7075-T6 axle
10T driver with two decent sized, strong sealed bearings
3 pawls with 30 engagement points / each 12°
disc brake mount IS (International Standard / 6-bolts)
available in 32h version only
weight: 465 grams
Need help choosing the right product?
Our team of riders and experts will be pleased to help you.
Specs
Size
Metric
Imperial
This is a size chart.
Geo
Metric
Imperial
Geometry of this bike.
Reach
Horizontal measurement taken from the middle of the bottom backet to the middle of the headtube.
Stack
Vertical measurement taken from the middle of the bottom bracket to the middle of the headtube.
Effective Top Tube
Horizontal measurement taken from the middle of the seatube to the middle of the headtube.
Actual Top Tube
True length of the top tube taken from the seatube along the toptup to the headtube.
Standover Height
Vertical measurement taken from the ground to the the middle of toptube.
Seat Tube Angle
Angle of the seatube.
Seat Tube Length
Lenght of the seat tube taken from the bottom bracket to the top of the seat tube (the measure is taken alongside the seat tube)
Headtube Angle
Angle of the headtube.
Headtube
Vertical lenght of the headtube.
Chainstay
Horizontal measurement taken from rear axle to the bottom bracket.
Wheelbase
Horizontal measurement between the two wheel axles.
BB Height
Vertical measurement taken from the ground to the bottom bracket (Never taken at sag).
BB Drop
Vertical measurement between the height of the axles and the height of the bottom bracket.
