I9 Hydra Enduro 300 - 29" 6Bolt 32H

Our benchmark wheelset evolves once again - introducing the
Industry Nine Hydra Enduro300. Since their inception, Industry Nine's
Enduro family of wheels has represented the cutting edge of technology.
From the early days of tubeless, through the revelation of 29", to the more
recent advent of wider, more capable rims, the Enduro series has kept
pace and set trends as the sport of mountain biking progresses.
Once again, the Enduro series continues to reach higher with the
Enduro300 - An aluminum triple-cavity rim featuring a hollow bead
wall extrusion designed to shrug off impacts and protect tires from
associated pinch flats. We achieved this by developing a rim shape that
boasts a wide bead wall while maintaining a competitive system weight.
The new EN300 is 46% wider than our previous EN305v3 and with a
gentle radius at the outer wall to keep the tire sidewall intact.
An added bonus of the wider bead wall is the increased structural
support that leads to greater impact resistance. During in-house

testing, we found that the EN300 performed better than the previous-
gen counterpart on a full range of impacts: from moderate rim blemishes

to severe impacts. Both the bead wall and the bead shelf exhibit
significant improvements in dent resistance vs. previous Enduro rims,
providing lab testing that validates our on trail experiences.
When paired with our renowned Hydra 32h system hub and spokes,
the EN300 rim emerges as a true best in class contender. Warp speed
engagement and responsive handling meets our hard-charging hollow
bead wall rim to create the latest in a proud lineage - the Industry Nine
Hydra Enduro300.

BUILT FOR
Aggressive All-Mountain

SIZES
27.5'' | 29''

HOLE COUNT
32

RIM INNER WIDTH
30mm

TIRE WIDTH
2.3'' - 2.6''

SET WEIGHT
27.5" 1800g
29" 1870g

https://www.industrynine.com/documents/mtnrimevo.pdf

ALLOY PRODUCT WARRANTY
We offer a two-year warranty against defects in materials or workmanship on all Industry Nine products. Industry Nine will repair or replace, at our discretion, any affected components or assemblies. The warranty will apply to stems, MatchStix, hub shells, axles, drive mechanisms, spokes, and rims.

The intended application of Industry Nine products are single rider bicycles. Industry Nine will not be able to provide warranty support or assume liability for hubs or wheels that are utilized outside of their intended purpose. This warranty covers materials and workmanship but does not cover normal wear and tear, such as bearing wear, or damage due to lack of proper service intervals.

Spokes will be warranted against defects, but not trail accidents, drivetrain/frame mechanical failure, or foreign object intrusion.

Aluminum rims are covered under the two-year warranty but are not warrantied for impact or crash damage. Use of non-authorized aftermarket adaptors and/or modification of axles, hubs, spokes or any other component may result in a voided warranty. Modification of rim finish or graphics by use of stripping solvents or chemicals will void rim warranty.

We believe in our product and will try to give Industry Nine customers the benefit of the doubt in any case where the cause of failure is undetermined.