The GRCX is solely focused on one thing: drop bar riding on varied surfaces. It is for rides on gravel roads, cyclocross courses, or where "road" is merely a suggestion or loose concept to get you from point A to point B. Employing a more robust rim than any other wheel in the CX line-up, and intended for 33mm to 2.1" treads courtesy of a 24.5mm inner rim width, GRCX is focused squarely on off-road riding and exploring. But despite its all terrain capability, this wheelset isn't an unwieldy brute - it retains a performance soul and comfortable ride quality care of the sprightly Torch road disc chassis. Expand your range without adding unnecessary bulk with GRCX.
ALLOY PRODUCT WARRANTY
We offer a two-year warranty against defects in materials or workmanship on all Industry Nine products. Industry Nine will repair or replace, at our discretion, any affected components or assemblies. The warranty will apply to stems, MatchStix, hub shells, axles, drive mechanisms, spokes, and rims.
The intended application of Industry Nine products are single rider bicycles. Industry Nine will not be able to provide warranty support or assume liability for hubs or wheels that are utilized outside of their intended purpose. This warranty covers materials and workmanship but does not cover normal wear and tear, such as bearing wear, or damage due to lack of proper service intervals.
Spokes will be warranted against defects, but not trail accidents, drivetrain/frame mechanical failure, or foreign object intrusion.
Aluminum rims are covered under the two-year warranty but are not warrantied for impact or crash damage. Use of non-authorized aftermarket adaptors and/or modification of axles, hubs, spokes or any other component may result in a voided warranty. Modification of rim finish or graphics by use of stripping solvents or chemicals will void rim warranty.
We believe in our product and will try to give Industry Nine customers the benefit of the doubt in any case where the cause of failure is undetermined.
Need help choosing the right product?
Our team of riders and experts will be pleased to help you.
This is a size chart.
Geometry of this bike.
Horizontal measurement taken from the middle of the bottom backet to the middle of the headtube.
Vertical measurement taken from the middle of the bottom bracket to the middle of the headtube.
Effective Top Tube
Horizontal measurement taken from the middle of the seatube to the middle of the headtube.
Actual Top Tube
True length of the top tube taken from the seatube along the toptup to the headtube.
Vertical measurement taken from the ground to the the middle of toptube.
Seat Tube Angle
Angle of the seatube.
Seat Tube Length
Lenght of the seat tube taken from the bottom bracket to the top of the seat tube (the measure is taken alongside the seat tube)
Angle of the headtube.
Vertical lenght of the headtube.
Horizontal measurement taken from rear axle to the bottom bracket.
Horizontal measurement between the two wheel axles.
Vertical measurement taken from the ground to the bottom bracket (Never taken at sag).
Vertical measurement between the height of the axles and the height of the bottom bracket.
OUR TEAM OF EXPERTS GOT YOUR BACK !
We are always an email or a phone call away to help you pick the best bike & parts that will match your needs.
RELIABLE PRODUCTS HANDPICKED FOR YOU!
We are all riders and our product line has been put to the test of time and hard riding. That is why our customers can also rely on them.
FREE SHIPPING ON ORDERS OF $150 AND OVER
Get your product for free and fast ! You’ll be ready to ride in no time !