These great quality pedals made from injection molded nylon are a lot lighter then aluminium pedals. A 22mm low profile, high quality ball bearings and a grippy platform is all you will need. Small knurlings on the whole contact surface & bigger size pins improve pedal grip. The axle is hardened and comes with a 15mm wrench slot and 6mm socket. The pedals will last for a long time if not used for grinding. Remember that plastic' is not as good for grinding or hard impacts as aluminium. However you may use these pedals for grinding on completely different surfaces like aluminium, wood etc. If you are a hardcore rider use them hard and replace them if needed, they are cheap!
Specs
MAIN FEATURES
material: injection molded transparent Polycarbonate
ball bearings
12 big pins on each side
platform: 97mm x 92mm
thickness: 22mm
15 mm flat wrench slot + 6mm Allen hex socket
axle thread size: standard 9/16″
weight: only ~355g!
Need help choosing the right product?
Our team of riders and experts will be pleased to help you.
Specs
Size
Metric
Imperial
This is a size chart.
Geo
Metric
Imperial
Geometry of this bike.
Reach
Horizontal measurement taken from the middle of the bottom backet to the middle of the headtube.
Stack
Vertical measurement taken from the middle of the bottom bracket to the middle of the headtube.
Effective Top Tube
Horizontal measurement taken from the middle of the seatube to the middle of the headtube.
Actual Top Tube
True length of the top tube taken from the seatube along the toptup to the headtube.
Standover Height
Vertical measurement taken from the ground to the the middle of toptube.
Seat Tube Angle
Angle of the seatube.
Seat Tube Length
Lenght of the seat tube taken from the bottom bracket to the top of the seat tube (the measure is taken alongside the seat tube)
Headtube Angle
Angle of the headtube.
Headtube
Vertical lenght of the headtube.
Chainstay
Horizontal measurement taken from rear axle to the bottom bracket.
Wheelbase
Horizontal measurement between the two wheel axles.
BB Height
Vertical measurement taken from the ground to the bottom bracket (Never taken at sag).
BB Drop
Vertical measurement between the height of the axles and the height of the bottom bracket.
